MAIN APPLICATIONS:
1. Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission
2. Media converter for network backbone(SAN, LAN, MAN)
3. Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
KEY FEATURE:
1. Support Jumbo Frame
2. Transparent Transport and very low delay
3. Support ITUT prescribed DWDM/CWDM wavelength
4. Support DMI function for SFP+ fiber module
5. Support Loopback test function
6. Economic In-band Management function
7. powerful Network Management function(Web,SNMP,Console)
8. Support hot plugging
9. Support 2U Rack (16 channel) and standalone use
10. Full State Led display
11. Easy installation
12. UTP cable length detection(only RJ45 interface)
TECHNICAL INFORMATION :
| Performance Data |
Technical Indexes |
| Transmission Speed |
10Gb/s |
| Protocols |
IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-SR/LR/ER/ZR) |
| Access Type |
10G LAN |
| Interface Type |
Type: RJ45 To/From SFP+ |
| Transmission Distance |
SFP+ module: Up to 80Km
10Gbase-T: 100meters Cat .6a cable
|
|
Maximum Packet
Forwarding Rate
|
14,880,950/S |
|
Network management
information:
|
•Card type information
•SFP+ fiber module detection
•SFP+ fiber module DMI function ( Temperature , Voltage , Optical power)
•Link status detector
•Enable/Disabled Loopback test function
•UTP cable length detection ( only RJ45 interface )
•Remote card's status monitor ( only in pairs )
|
| power requirement |
Rack-mountable : AC 85 ~ 220V OR DC -48V
Standalone: AC 220V OR DC -48V
Power consumption: ≤9W
|
| Work Environment |
Operating Temp: 0~ 50 °C
Storage Temp: -10~ 70 °C
Humidity: 5%~90% ( non-condensing )
|
| Dimension |
Card : 11.5mm ( W ) × 78mm ( D )
Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H )
|
